Company Profit  |  Product List  |  Contact us    

Cable Management Systems

SK Cable Management Systems are a range of support products specifically designed to meet the ever changing and developing needs of designers, users and installers within the Electrical Industry. The range Includes Cable Tray. Cable Ladder and Cable Trunking with attendant Accessories, which gives infinite design flexibility and maximum "on site" convenience. A diversity of configuration options makes SK Cable Tray. Cable Ladder and Cable Trunking suitable for a wide variety of uses, from light duty Installations to the heaviest Power or Offshore needs.

■ Hot-dip Galvanized to BS729 / BS EN ISO 1461 (HDG)  ■ Pre-Galvanized to BS2989 / BS EN 10142 (PG)  ■ Stainless steel 304/316 to BS970/ BS EN 10088-2    (SS3O4/SS316)  ■ Epoxy-coating

Cable Tray

Size Thickness Tray Width Flange Height 50 1.0 - 1.5 mm 50 mm 13 mm 75 1.0 - 1.5 mm 75 mm 13 mm 100 1.0 - 1.5 mm 100 mm 13 mm 150 1.0 - 1.5 mm 150 mm 13 mm 225 1.0 - 1.5 mm 225 mm 13 mm 300 1.0 - 1.5 mm 300 mm 20 mm 450 1.5 - 2.0 mm 450 mm 20 mm 600 1.5 - 2.0 mm 600 mm 20 mm 750 1.5 - 2.0 mm 750 mm 20 mm 900 1.5 - 2.0 mm 900 mm 20 mm
Size Thickness Tray Width Flange Height 50 1.0 - 1.5 mm 50 mm 50 mm 75 1.0 - 1.5 mm 75 mm 50 mm 100 1.0 - 1.5 mm 100 mm 50 mm 150 1.0 - 1.5 mm 150 mm 50 mm 225 1.0 - 1.5 mm 225 mm 50 mm 300 1.0 - 1.5 mm 300 mm 50 mm 450 1.5 - 2.0 mm 450 mm 50 mm 600 1.5 - 2.0 mm 600 mm 50 mm 750 1.5 - 2.0 mm 750 mm 50 mm 900 1.5 - 2.0 mm 900 mm 50 mm

---

---

Cable Ladder

SK Cable Ladder is fabricated from cold rolled formed side members available in a range of depths from 50 -150mm at increments of 25mm, with cross rungs from slotted channel welded face up/down set low In the side rails for greater flexibility. Widths: SK Cable Ladder is produced with Internal widths of 150, 300, 450, 600, 750 and 900mm. Options of 50mm increments are available to order. Accessories A Comprehensive range of Bends, Tees, Risers and Crossovers are available to complement Straight Ladder. All accessories ore available in standard choices of radii; 300,450,600,750 and 900mm or alternative sizes to order

---

---

---

Cable Trunking

Specifications »Manufactured to BS4678:Part 1:1971 Class 3 Protection »Standard Finishes - Pre-galvanized, G275 Classification »Alternative Finishers -Hot Dip Galvanized to BS729                                    -Plastic Coated                                    -Epoxy Power Coated »Dimensional tolerance ±5% »Standard Length 2.44 metres »Each trunking body, supplied with cover, 1pair of couplers, 8 numbers of M5 fixing screws and 1 number of copper earth link »Standard cover secured by turnbuckle copper screw.

Standard Size Material Thickness 50 x 50 mm 1.0 1.0 75 x 50 mm  1.2 1.2 75 x 75 mm 1.2 1.2 100 x 50 mm 1.2 1.2 100 x 75 mm 1.2 1.2 100 x 100 mm 1.2 1.2 150 x 50 mm 1.2 1.2 150 x 75 mm 1.2 1.2 150 x 100 mm 1.2 1.2 150 x 150 mm 1.4 1.2 200 x 100 mm 1.6 1.4 225 x 50 mm 1.6 1.4 225 x 75 mm 1.6 1.4 225 x 100 mm 1.6 1.4 225 x 150 mm 1.6 1.4 225 x 225 mm 1.6 1.4 300 x 50 mm 1.6 1.6 300 x 75 mm 1.6 1.6 300 x 100 mm 1.6 1.6 300 x 150 mm 1.6 1.6 300 x 300 mm 2.0 1.6

---

Optional Covers / Spring / Clip Fixed / Screw Fixed

Spring Clip Covers	Screw Fixed Cover	Gusset Bends	Elbow Bends	45° Bends	90° Risers
Gusset Tees	Elbow Tees	Crossovers	Centre / Offset Reducers
Flange outlet	Pier Set	Fitting Coupler	Long Sleeve Coupler	Pin Rack	Stop End
Wall Mounted Connector	(1mm) Partition	Flanged Tee Connector	Horizontal Angle  (Right hand)	Horizontal Offset  (Right hand)	Vertical Offset
Face Change Unit	Spring Clip	Flange Screw	Turnbuckle fastener with  screw	Copper Earth Link	Standard Coupler

　

---